34 Chapter 1 Get started EN
Update the printer
Update the printer firmware for printers connected to a computer with Windows.
1. Make sure the printer is on and connected to the computer through your local network or USB cable.
2. Open the Ricoh website.
http://support.ricoh.com/services/device/qr/D0EW.html
3. Select the language.
4. Click the Firmware tab, and then click Download.
5. If a Firmware section is not listed, an update is not currently available for your printer.
6. Save the file to your computer.
7. Locate and then open the file to start the installation process.
To Next Page
Loading...
