Ricoh IJM C180F

EN 283Restore original factory defaults and settings
Restore original factory defaults and settings
If you disable some functions or change some settings and want to change them back, you can restore the
printer to the original factory settings or network settings.
To restore the selected printer functions to the original factory settings
1. From the printer control panel, touch or swipe down the tab
at the top of the screen to open
the Dashboard, and then touch
(Setup).
2. Touch Printer Maintenance.
3. Touch Restore.
4. Touch Restore Settings.
5. Select one of the following functions to restore to the original factory settings:
• Copy
• Scan
• Fax
• Photo
• Network
6. Touch Restore.
A message appears stating that the settings will be restored.
7. Touch Restore.
To restore the printer to the original factory defaults from the printer display
1. From the printer control panel, touch or swipe down the tab
at the top of the screen to open
the Dashboard, and then touch
(Setup).
2. Touch Printer Maintenance.
3. Touch Restore.
4. Touch Restore Factory Defaults.
A message appears stating that the factory defaults will be restored.
5. Touch Continue.