138 Chapter 4 Fax EN
Set up the printer with a computer DSL/ADSL modem
If you have a DSL line and use that phone line to send faxes, follow these instructions to set up your fax.
1 Telephone wall jack.
2 Parallel splitter.
3 DSL/ADSL filter.
Connect one end of the phone cord to the port labeled
on the back of the printer. Connect the other end of
the cord to the DSL/ADSL filter.
You might need to connect the phone cord to your country/region adapter.
4 Computer
5 Computer DSL/ADSL modem.
NOTE
: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2.line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.
Figure 4-8 Example of a parallel splitter
To Next Page
Loading...
