EN 23Load paper
3. Insert the paper in portrait orientation and with the side to be printed facing down.
Push the stack of paper toward the rear of the input tray until the paper stops, and then slide the paper
width guides until they lightly rest against the edges of the paper.
Make sure the stack of paper is aligned with the appropriate paper size lines on the front of the tray.
Also, make sure the stack of paper does not exceed the stack height marking on the left edge of the tray.
NOTE: Do not load paper while the printer is printing.
4. Adjust the paper-width guides until they touch the left and right edges of the stack of paper.
To Next Page
Loading...
Need help?
General