4.Service Tables
73
No Function Comments
0* Printing while a paper cassette is pulled out, when the Just Size
Printing feature is enabled.
0: Printing will not start
1: Printing will start if another cassette has a suitable size of paper,
based on the paper size selection priority tables.
Cross reference
Just size printing on/off – User
switch 05, bit 5
1-
7
Not used. Do not change the settings.
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 07 (SP No. 1-103-008)
No Function Comments
0 Not used. Do not change the settings.
1 Selects the 95% reduced
printing function for letter
size.
0:OFF Not reduced printing
1:ON Only when printing letter size, performs 95% reduced printing of
the entire image (in both of main and sub directions) Report printing and
printing from the bypass tray are excluded.
2-
3
Not used. Do not change the settings.
4 Receiver name printed on
the transmission result
report
Selects the printing target on the transmission result report.
0: All receivers
1: Printing only receivers which have received fax transmission.
5-
7
Not used. Do not change the settings.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
0* Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the received data is selected
first.
1: A paper size which has enough length to print all the received lines
without reduction is selected first.
1* Paper size selected for printing This switch determines which paper size is selected for printing A4