Ricoh MP C407

4.Service Tables
74
A4 width fax data
0: 8.5" x 11" size
1: A4 size
width fax data, when the machine has both A4 and 8.5" x 11" size
paper.
2 Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require page separation to print a
received fax message, the machine does not print the message
(Substitute Reception is used).
After a larger size of paper is set in a cassette, the machine
automatically prints the fax message.
3-
4
Printing the sample image on
reports
"Same size" means the sample image is printed at 100%, even if page
separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set to "0" to enable this
switch.
Refer to Detailed Section Descriptions for more on this feature.
Bit
4
Bit
3
Setting
0 0 The upper half
only
0 1 50% reduction
(sub-scan only)
1 0 Same size
1 1 Not used
5-
6
Not used Do not change the settings.
7 Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
0: When page separation has taken place, all the pages are reduced
with the same reduction ratio.
1: Only the last page is reduced to fit the selected paper size when
page separation has taken place. Other pages are printed without
reduction.
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 0F (SP No. 1-103-016)
No Function Comments
0-
1*
Smoothing feature (0, 0) (0, 1): Disable smoothing if the machine receives halftone images
from other manufacturers fax machines frequently.
Bit 1 Bit 0 Setting
0 0 Disabled
0 1 Disabled
1 0 Enabled
1 1 Not used
2* Duplex printing
0: Disabled
1: Enabled
1: The machine always prints received fax messages in duplex printing
mode:
3 Binding direction for Duplex 0: Sets the binding for the left edge of the stack.