4.Service Tables 
87 
1  0  1  0  24.0 
1  0  1  1  26.4 
1  1  0  0  28.8 
1  1  0  1  31.2 
1  1  1  0  33.6 
Other settings - Not used 
4-
5 
Initial modem type for 9.6 k or 7.2 
kbps. 
These bits set the initial modem type for 9.6 and 7.2 kbps, if the 
initial modem rate is set at these speeds. 
Bit 5  Bit 
4 
Setting 
0  0  V. 2 9  
0  1  V. 1 7  
1  0  V. 3 4  
1  1  Not used 
6-
7 
Not used  Do not change the settings. 
 
G3 Switch 06 (SP No. 1-105-007) 
No  Function  Comments 
0-
3 
Initial Rx modem rate(kbps)  These bits set the initial starting modem rate for 
reception. 
Use a lower setting if high speeds pose problems 
during reception. 
If a modem rate 14.4 kbps or slower is selected, V.8 
protocol should be disabled manually. 
Cross reference 
V. 8  protocol on/off - G3 switch 03, bit2 
Bit 3  Bit 
2 
Bit 
1 
Bit 
0 
kbps 
0  0  0  1  2.4 
0  0  1  0  4.8 
0  0  1  1  7.2 
0  1  0  0  9.6 
0  1  0  1  12.0 
0  1  1  0  14.4 
0  1  1  1  16.8 
1  0  0  0  19.2 
1  0  0  1  21.6 
1  0  1  0  24.0 
1  0  1  1  26.4 
1  1  0  0  28.8 
1  1  0  1  31.2 
1  1  1  0  33.6 
Other settings - Not used 
4- Modem types available for reception