Electrical Components
323
HDD
• Before replacing the HDD, copy the address book data to an SD card with SP5-846-051 if there is no
problem.
• If the customer uses the Data Overwrite Security, IC card reader, or OCR unit, these applications must
be installed again after replacing the HDD.
1. Remove the rear cover. (Rear Cover)
2. Remove the left cover. (Left Cover)
3. Remove the HDD with the bracket [A].
4. Remove the bracket from the HDD [A].
Adjustment after Replacement
1. Do SP5-832-001 to initialize the HDD.
Initialization should be performed for the HDD which was already formatted before.
2. If applicable, do SP5-846-052 to restore the address data from SD card to the HDD.
To Next Page
Loading...
