Ricoh MP C407

3.SP Mode Tables
381
No. Part Name SP Name SP
No.
Remark
- - PP:Charge DC:M 5-
804-
045
drum. Therefore the drum may be damaged
electrostatically.
Note:
If you turn ON these SPs multiple at the same time, and
turn OFF one of the SPs, all of the output will be stopped.
When you want to stop the outputs, turn OFF all of the
SPs turned ON.
- - PP:Charge DC:C 5-
804-
046
- - PP:Charge DC:Bk 5-
804-
047
- - PP:Development: Y 5-
804-
048
- - PP:Development: M 5-
804-
049
- - PP:Development: C 5-
804-
050
- - PP:Development: Bk 5-
804-
051
- - PP: Image Transfer:
YMC
5-
804-
053
Do not turn ON these SPs with the PCDU installed.
If you turn ON with the PCDU installed, an electric
current continues to flow in a particular place of the
drum. Therefore the drum may be damaged
electrostatically.
- - PP: Image Transfer:
Bk
5-
804-
056
- - PP: Paper Transfer: + 5-
804-
057
- - PP: Paper Transfer: - 5-
804-
058
- - PP:Charge AC:Y 5-
804-
059
Do not use these SPs, otherwise SC312 will occur.