Message Cause Solution and reference
"No response from
the server.
Authentication has
failed."
In LDAP or
Windows
authentication, a
timeout error
occurred while
submitting an
authentication
query to the server.
Consult the administrator of the authentication server.
When using the Active Directory of the Windows server
for LDAP Authentication, change [Settings] [System
Settings] [Settings for Administrator]
[Authentication/Charge] [Administrator
Authentication/User Authentication/App Auth.]
[LDAP Search] "Follow Referrals on LDAP Server" to
[Inactive].
"Output tray has
been changed."
The destination to
deliver the output
paper was changed
because of the
paper size limitation
of the output
destination.
Specify the correct destination to deliver the output
paper.
"Paper size and/or
type mismatched or
no ppr. in Bypass
Tray."
The paper size or
paper type
specified in the
printer driver does
not match the paper
settings, in the
machine, for the
bypass tray.
Specify [Driver/Command] in [Tray/Paper Settings]
[Printer] [Tray Setting Priority] [Bypass Tray].
"Paper size and type
are mismatched.
Select another tray
from the following
and press
[Continue]. To
cancel job, press
[Job Reset]. Paper
size and type can
also be changed in
User Tools."
The paper tray
loaded with paper
of the size or type
specified in the
printer driver is not
available.
• To proceed with printing after changing the paper
setting, select a tray and press [Continue]. When
Staple, Cover Sheet, Slip Sheet, Chaptering, or
Designate is specified, or when Duplex printing is
specified on a paper tray that does not support the
function, printing cannot be performed. When Sort
is specified, only one copy of the document is
printed.
• To proceed with printing on the specified paper,
load the paper and then check that the paper size
and type are correctly specified in [Tray/Paper
Settings]
page 197 "Loading Paper into the Paper Tray"
When a Message Appears While Using the Printer Function
401
To Next Page
Loading...
