Technical Bulletin PAGE: 26/28
Reissued: 07-Aug-2012
Model: Aries-P1.5/C1.5 Date: 18-Feb-11 No.: RM077019g
The following describes an example of a result obtained after adjusting the paper feeding
speed.
Brown line: When No37: Paper Feed Interval Setting is set to 0.0 (Default)
The shock-jitter/banding appears on the 2
nd
page as follows:
z Shock-jitter at ITB in Black and Cyan
z Shock Jitter at OPC in Black
The shock-jitter/banding appears on the 3
rd
page as follows:
z Shock-jitter at ITB in Magenta and Yellow
z Shock Jitter at OPC in Magenta
Productivity: 100%
Purple line: When modifying No37: Paper Feed Interval Setting to 0.3
The shock-jitter/banding appears on the 2
nd
page as follows:
z Shock-jitter at ITB in Cyan
z Shock-jitter at OPC in Black and Cyan
The shock-jitter/banding appears on the 3
rd
page as follows:
z Shock-jitter at ITB in Yellow
z Shock Jitter at OPC in Yellow
Productivity: Approx 80%
The above adjustment allows the shock-jitter to occur between the sheets, resulting in
elimination of the shock-jitter/banding in Magenta.
To Next Page
Loading...
