Ricoh pro c901 - Page 119

Technical Bulletin PAGE: 4/11
Model: AG-P1 / C1 Date: 20-Apr-11 No.: RM077024
Replacement Procedure: Transport Roller & Spring
Modification Kit:
M3799901 MODIFICATION KIT: BUFFER PASS
Step 1-1. Open the front door, pull out the transport unit, remove four screws from the slide rails
and seven from the inner cover, and remove the inner cover and lever.
Step 1-2. Loosen the four Tightener Pulleys, and remove the Timing Belts from the pulleys.
Inner Cover
fixing screw
Pull out the unit and remove the four screws.
Remove the seven screws, lever,
and inner cover.
Timing Belts 1 & 2 do NOT have to be removed. Hook them on the bracket.
Timing Belts 3 & 4 must be removed.
Timing
Belt 1
Timing
Belt 2
Timing
Belt 3
Timing
Belt 4
Tightener
Pulley 1
Tightener
Pulley 2
Tightener
Pulley 3
Tightener
Pulley 4