Technical Bulletin PAGE: 11/11
Model: AG-P1 / C1 Date: 20-Apr-11 No.: RM077024
Step 3-5. Remove the Vertical Transport and Lower Guide Plates.
Step 3-6. Replace the two Guide Plates with the modified Guide Plates, and follow steps ‘3-1’ to ‘3-
5’ in reverse to order to reassemble the unit.
Step 3-7. Put back the transport unit to complete the procedure. (See ‘Step 1-1’.)
Guide Plate: Vertical Transport: Right
Front
Rear
Guide Plate: Vertical Transport: Right (Screw x8)
Guide Plate: Lower (Screw x6)
Guide Plate: Lower
There is the same screw at the other side for the
Guide Plate: Lower.
To Next Page
Loading...
