Technical Bulletin PAGE: 14/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step B-11. Remove the brackets for the junction gates.
Remove the feeler attached to the rear side of the lower junction gate
and remove the lower junction gate.
Lower junction gate feeler
Do NOT drop and lose this bushing.
White bushing
Bracket for lower junction gate
Bracket for uppe
unction gate
Remove the 2 screws for the upper and lower junction gates respectively.
Disconnect the harness from the motor.
Be careful not to drop the white bushing from the bracket.
Lower junction gate
To Next Page
Loading...
