Technical Bulletin PAGE: 20/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step B-21. Remove the 2 brackets located in the front and rear sides.
Step B-22. Remove the shift tray exit driven roller.
Remove the spring and the bushing.
Remove the bracket together with the bearing.
The 2 screws DO NOT have to be removed.
Rear
Spring
Bushing
Bearing
Bracket (Rear)
Front
Spring
Bushing
Shaf
When reinstalling the bearing,
make sure the flanged side
faces the outside.
Bracket (Front)
Flange faces outside
Bearing
Remove the 2 screws, spring, and the bearing.
To Next Page
Loading...
