Ricoh pro c901 - Page 177

Technical Bulletin PAGE: 25/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step B-28. Replace the lower exit guide plate.
Step B-29. Replace with the NEW shift tray exit driven rollers.
Replace with the NEW lower exit guide plate.
Install all the new parts except for the film and the 2
clamps, which are affixed and cannot be removed.
NEW film and clamps to be installed additionally.
OLD
g
uide
p
late
Clam
p
x2
Following 2 parts to be reused:
 Sensor bracket
 Sensor
Not
removable
Attach the NEW film
（D4472326A) here.
Deviation to be within 1mm
NEW guide plate
（
D4472327 )
New Rollers
（
D4342459 )
Remove the E-rings (x4) attached to both sides of the roller,
install the new rollers on the new shaft, and secure the rollers with the E-ring.
Wider cuts
New Shaft （D4472879）
B-9
B-6
B-8
Ne
w
Old
B-7
New Clamp x2
(
11050717
)
B-10