Technical Bulletin PAGE: 4/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step C-4. Replace with the new “Bracket: Protect: Drive Sub-unit”.
Step C-5. Attach the “BRACKET:AUXILIARY” to the “Bracket: Protect: Drive Sub-unit “.
Install AE030030: BALL BEARINGS (x3) on the pin on the
D4774123: BRACKET, and secure the bearings with
07200060E: REATINING RING.
D4474123: BRACKET: AUXILIARY
AE030030: BALL BEARING 8X19X6
07200060E: RETAINING RING –M6
Insert the pin into the D4474121: Bracket:
Protect: Drive Sub-unit, and secure the
bracket with screws (x2).
04514006N : TAPPING SCREW: 4X6
D4474121 : BRACKET:PROTECT:DRIVE SUB-UNIT
C-2
C-1
C-3
C-5
C-4
To Next Page
Loading...
