Technical Bulletin PAGE: 7/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step C-10. Remove the following 2 brackets.
Step C-11. Disconnect the PCB connectors, and remove the inner cover and the bracket.
Remove 2 screws, ground wire, and
“Bracket: Inlet: Leak Breaker”.
Remove 2 screws and “Bracket:
Cover: Rear Lower”
C-11-1.
Remove all the connectors from
PCB: Main Control: Ass’y
C-11-3.
Remove the Inner Cover: Rear Right
(screw x4)
C-11-2.
Remove the bracket that holds
the PCB: Main Control: Ass’y
(screw x4)
To Next Page
Loading...
