Technical Bulletin PAGE: 7/7
Model: Aries-P1.5/C1.5 Date: 04-Nov-11 No.: RM077049
7. Install the Holder:Slide rail.
7. Remove the sheets used for protecting the ITB and follow steps 1-3 in reverse order to set the
PCDU.
8. Turn on the machine power and print out a 4x4 Flat pattern to check the image quality before
completing the procedure.
Pull out the Slide-rail and attach it to the “Holder: Slide-rail” removed in step 2 with the 2 screws.
Slide rail
Holder : Slide rail
To Next Page
Loading...
