Technical Bulletin PAGE: 3/6
Model: Aries-P1.5 (M077) Date: 25-Nov-11 No.: RM077052
3. Installation
Installation Overview
Step 1. Installing the special bracket
Step 2. Removing the guide plate supplied with the GBC StreamPunch (if installed)
Step 3. Installing the special guide plate
Step 4. Docking the GBC StreamPunch to the main machine
Step 5. Mainframe height adjustment
Step 1. Installation of the special bracket
1.1. Install the special bracket [A] (4 screws)
Step 2. Removing the guide plate supplied with the GBC Stream Punch.
2.1. If installed on the punch unit, remove the guide plate [A] supplied with the GBC
Stream Punch. Keep the screws you removed. You will need them to install the
special guide plate (Step 3).
[A]
BRACKET:ADAPTER
SECTION:GBC:PEEN (M0774703)
[A]
To Next Page
Loading...
