Ricoh pro c901 - Page 3

Technical Bulletin PAGE: 3/5
Reissued: 09-Jan-14
Model: Aries-P1.5
Date: 04-Oct-10
No.: RM077001h
Version
Modified Points or Symptom Corrected
Ope Panel CHN
M0776387
1.05
Ope Panel NA
M0776385C
1.05
Ope Panel EU
M0776386C
1.05
Language
M0776390B
1.04
Network Support
M0776692C
7.12
1.005:16
Modified Points
- Early web cleaning indication has been fixed
- fuser unit PM counter is corresponding to several fusing unit to prevent
fusing belt from wearing away
- Countermeasure for 2 output checks, waste toner could clog and disable
the function of the toner collection coil, which could result in breakage of
the gear rotating the waste toner transport coil, and toner leakage.
- Following adjustable range has been changed in Web Image Monitor
Erase Margin Adj Leading Edge
Erase Margin Adj Trailing Edge
Minimum setting 0.0 --> -6.0
Following firmware need to be upgraded together
Part number
Version
Engine
M0775252D
1.005:16
System/Copy
M0776091D
1.03
Websys
M0776093B
1.01
Ope Panel NA
M0776385B
1.04
Ope Panel EU
M0776386B
1.04
Language
M0776390A
1.03
1.004:16
Modified Points
Bugs in menu items in Custom Paper Setting Advanced Setting are fixed.
Item Menu No. 03 "Pickup Assist Setting"
Item Menu No. 15 "Paper Transfer Feed Speed Adjustment"
Bug which has been fixed
Even the No. 03 "Pickup Assist Setting"was set as OFF, inside the machie,
"Pickup Assist Setting" was set to auto setting; therefore, depending on Paper
weight and Paper Size, "Pickup Assist Setting"
was activated.
Even the No 15 "Paper Transfer Feed Spped Adjustment" was set as
0.0, PTR was not moving at the correct speed
Apply Condition for Creo Controller
Please use Creo Controller Ver 1.003:16 or older.