Technical Bulletin PAGE: 6/15
Reissued:16-Oct-12
Model: Aries-C1.5 (D095) / Aries-P1/.5(M077) Date: 8-Nov-2012 No.: RM077077b
Procedure 2: Screen Setting
2-1. In the printer driver setting, select the Image tab.
2-2. Select several screening settings from the Halftone Mode drop-down list and run test
prints to determine the most effective setting.
NOTE: The lower the screening setting, the higher the effect for mottled images with a
trade-off in generating grainy images. It is recommended to test the effect by
gradually increasing the setting from 150 Dot to 200 Dot.
Mottled Effect Screening Setting Image quality
Step 1 150 Dot
Step 2 175 Line
175 Dot Step 3
200 Line
Step 4
Good
Bad
200 Dot
Grainy
Fine
IMPORTANT: Make sure your customer accepts the graininess as a result of the
screening setting applied.
To Next Page
Loading...
