Technical Bulletin PAGE: 24/75
Reissued:21-Apr-14
6. Do “No.208 Execute Toner Refreshing” in the Adjustment Settings for Skilled Operators
Menu for the affected color and check the results with the customer job.
Are the results accepted by the customer?
YES: Finish (See “Lines No4”.)
NO: Go to the next step.
7. Clean the “doctor gap” of the development unit of the affected color and check the
results with the customer job.
Are the results accepted by the customer?
YES: Finish (See “Lines No5”.)
NO: Go to the next step.
8. Replace the developer mixture of the affected color by referring to the procedures
described in RTB RM077072a.
To Next Page
Loading...
