Technical Bulletin PAGE: 51/75
Reissued:21-Apr-14
No.7 5mm Pitch Banding
Cause
PTR Roller Gear
Location of the band by color and paper size
Across the entire page
Action
1. Register the paper in use to the Paper Library.
2. In Advanced Settings No15: Paper Transfer Feed Speed Adjustment, reduce the
paper feed speed to -0.1% or -0.2% from the current speed.
If the results are accepted by the customer, complete the procedure.
If the results are unaccepted by the customer, set the paper transfer speed back to the
default.
Side effect
Modifying the paper feeding speed could cause the following side effects.
a. Trailing 85mm banding (No4)
b. Change in image length
To Next Page
Loading...
