Technical Bulletin PAGE: 11/35
Reissued: 6-Jun-15
Model: Aries-C1.5/P1.5 (D095/M077)
6) On the table, fold the 4 corners in the opposite direction so that the corners
appear on the side indicated ‘Second’ faces up. Do the same for all 3 charts.
7) Place the chart on the contact glass so that the side indicated ‘First’ faces up.
8) Scan the second side of all 3 charts. With the measurements obtained in steps 6
and 8, SP values for front and back registration are corrected.
9) Print out the trimming chart to check the results.
To Next Page
Loading...
