Technical Bulletin PAGE: 2/3
Where to attach and how many to attach
Spacer seals [C] are provided together with an instruction sheet [A]. Numbers 1~4 in table
[B] on the instruction sheet correspond to the numbers in the photo indicating where the
spacer seals need to be attached. Quantities of the spacer seals are handwritten in the
table to indicate how many seals need to be attached.
The example below shows that 2 spacer seals need to be attached to location .
NOTE: The spacer seals may have 4 different types of thickness, but all spacer seals
need to be attached to the same location according to the instruction sheet [A].
To Next Page
Loading...
