Ricoh pro c901 - Page 586

Technical Bulletin PAGE: 3/3
Model: Aries-P1.5/C1.5
Date: 22-Nov-16
No.: RM077117
6. Remove the double-feed sensor bracket [A] (screw x1, connector x1).
7. Remove the sensor harness [A] and emitter [B] from the bracket.
8. Install the harness and emitter of the new sensor onto the bracket (harness clamp x1,
screw x1).
9. Put back the unit by following the above steps in reverse order.
[A]
[B]
[A]