Technical Bulletin PAGE: 25/44
Model: Aries-P1.5/C1.5 Date: 17-Feb-11 No.: RM077018
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
(Right fan from front view)
-021 D Fan alarm 2: Compressor fan 2
(Left fan from front view)
The machine detects a fan alarm signal from the plotter cooling
fan 1, 2, 3, or compressor fan 1 or 2 0.1 second during the fan
operation.
An obstruction has stopped plotter cooling fan 1, 2, 3, or
compressor fan 1 or 2.
Harness disconnected
91. Check the harness connection to plotter cooling fan 1, 2, 3, or
compressor fan 1 or 2.
92. Replace plotter cooling fan 1, 2, 3, or compressor fan 1 or 2.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
532
-001
B Fan alarm 3: A3 LCT front air assist fan 1
-002 B Fan alarm 3: A3 LCT rear air assist fan 1
The machine detects a fan alarm signal from front or rear air
assist fan 1 for 0.7 second after the paper exit motor has started
rotating for 1 second.
An obstruction has stopped front or rear air assist fan 1.
Harness disconnected
93. Check the harness connection to front or rear air assist fan 1.
94. Replace front or rear air assist fan 1.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
533
-001
B Fan alarm 4: A3 LCT front air assist fan 2
-002 B Fan alarm 4: A3 LCT rear air assist fan 2
The machine detects a fan alarm signal from front or rear air
assist fan 2 for 0.7 second after the paper exit motor has started
rotating for 1 second.
An obstruction has stopped front or rear air assist fan 2.
Harness disconnected
95. Check the harness connection to the front or rear air assist fan
2.
96. Replace front or rear air assist fan 2.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
534
-001
B Fan alarm 5: A3 LCT rear air assist fan 3
-002 B Fan alarm 5: A3 LCT rear air assist fan 3
The machine detects a fan alarm signal from front or rear air
assist fan 3 for 0.7 second after the paper exit motor has started
rotating for 1 second.
To Next Page
Loading...
