Technical Bulletin PAGE: 11/28
Reissued: 07-Aug-2012
Model: Aries-P1.5/C1.5 Date: 18-Feb-11 No.: RM077019g
Installing the Modified Fly Wheels
Required parts:
z Fly wheel (P/N M0771294) 8 pcs per machine; 2 pcs per station
z TAPPING SCREW: 4X12 (P/N: 04514012N) 12 pcs per machine; 3 pcs per station
1. Open the back Unit
2. Remove the fly wheel.
3. Insert 2 modified fly wheels in between the originally installed fly wheel and the
mainframe, and secure them with the TAPPING SCREW:4X12 (P/N: 04514012N). (x3
per station)
4. Repeat the above for all stations.
Note: After installing 2 modified fly wheels, the originally installed fly wheel should be
visible when viewed from the non-operator side of the unit.
Fly wheel
To Next Page
Loading...
