Technical Bulletin PAGE: 13/28
Reissued: 07-Aug-2012
Model: Aries-P1.5/C1.5 Date: 18-Feb-11 No.: RM077019g
No3. Shock-jitter at PTR
Cause
PTR vibrates due to the shock generated when the leading edge enters the fusing unit.
Location of the band by color and paper size
362 mm from the leading edge in all colors and paper sizes
Action
1. Register the paper that is now being used into the Paper Library.
2. In Advanced Settings, adjust No15: Paper Transfer Feed Speed Adjustment to a
value +/- 0.2% in relation to the current value.
Note the possible side effects “a”, “b”, and “c” when applying the above setting.
If the results are accepted by the customer, the procedure is complete.
If the results are not accepted by the customer, do the following step.
3. Set the paper transfer feed speed back to the default value.
4. Set the paper transfer current to -10uA for the following in Advanced Setting:
No 22: Paper Transfer Current: B&W Current Setting
No 23: Paper Transfer Current: FC Current Setting
If the results are accepted by the customer, the procedure is complete.
If the results are not accepted by the customer, do the following step.
Note the possible side effect “d” when applying the above setting.
362 mm
Band appears starting from the 1
st
sheet at the same location in all colors.
To Next Page
Loading...
