Technical Bulletin PAGE: 15/28
Reissued: 07-Aug-2012
Model: Aries-P1.5/C1.5 Date: 18-Feb-11 No.: RM077019g
No4. Banding at 85 mm TE (due to the shock generated when the trailing edge exits
the PTR)
Cause
Change in the image transfer properties when the trailing edge exits the registration gate
Location of the band by color and paper size
85 mm from the trailing edge in all colors and paper sizes
Action
1. Register the paper that is now being used into the Paper Library.
2. In Advanced Settings, adjust No15: Paper Transfer Feed Speed Adjustment to a
value +/- 0.2% in relation to the current value.
Note the possible side effects “a”, “b”, and “c” when applying the above setting.
If the results are accepted by the customer, the procedure is complete.
If the results are not accepted by the customer, set the paper transfer speed back to the
default.
Side effects
a) Possible PTR vibration due to Shock at Fusing Unit Entrance (No.3)
b) Possible banding at 5 mm intervals (No.7)
c) Possible change in image length
Location is same for all color from
1st page
85 mm
To Next Page
Loading...
