Ricoh Pro C9200 - 0718 [Folding Unit Tray Full Detection]; 0719 [Number of Sheets Folded after Full Detection]

Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[A3 SEF] 0.0 4.0 -4.0 0.2 mm
[B4 JIS SEF]
[A4 SEF]
[B5 JIS SEF]
[12 × 18 SEF]
[11 × 17 SEF]
[8
1
/
2
× 14 SEF]
[8
1
/
2
× 11 SEF]
[8K SEF]
[Other Paper Sizes]
0718 [Folding Unit Tray Full Detection]
Set whether to detect if Folder Tray is full of output sheets. By setting to [On], it continues printing up to
[Number of Sheets Folded after Full Detection], then shows a message.
Setting Item Values Default Value
[Setting] [On]
[Off]
[On]
0719 [Number of Sheets Folded after Full Detection]
Set number of sheets which activates message Folding Tray is full. Setting a large number delays
message and raises productivity, but may cause disarrayed stack of output sheets and paper jam.
• If the display of the warning message is delayed, the paper delivered to the folding unit tray may
not be stacked properly or the delivered paper may block the paper exit and cause subsequent
paper to be misfed.
2. Details of Menu Items in Adjustment Settings for Operators
112