Ricoh Pro C9200 - [Machine: Maintenance]; 0501 [Execute Cleaning Initial Setting for PCU]; 0502 [Wind Fuser Cleaning Unit at Replacement]; 0503 [Reset Parts Counter]

[Machine: Maintenance]
0501 [Execute Cleaning Initial Setting for PCU]
Execute after replacement of photoconductor cleaning unit and drum. Do not open the left and right
front covers during the operation. The control panel shows information during the operation.
• If it is necessary to execute this for all colors, execute it in the order of [CMY] and [Black].
Setting Items Remarks
[CMY] Press [Execute].
[Black]
[Cyan]
[Magenta]
[Yellow]
Setting Item
Default
Value
Max.
Value
Min.
Value
Step Unit
[No. of Pattern Repeats] 6 16 0 1 times
0502 [Wind Fuser Cleaning Unit at Replacement]
Wind Fusing Cleaning Web
Setting Item Remarks
[Execute] Press [Execute].
0503 [Reset Parts Counter]
Reset the counter value of replacement part after the replacement. Refer to "Replacement Manual" for
the procedure of part replacement.
2. Details of Menu Items in Adjustment Settings for Operators
38