Ricoh Pro C9200 - 0636 [Punch Position: with Feed]

Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes JP/ EU] 0.0 2.0 -2.0 0.5 mm
[3 Holes US]
[4 Holes EU]
[4 Holes NE]
[2 Holes US]
0636 [Punch Position: With Feed]
Adjust the position of the punch holes in the feeding direction. Use [+] to move away from the back end,
and [-] to move toward the back end.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes JP/ EU] 0.0 4.0 -4.0 0.5 mm
[3 Holes US]
[4 Holes EU]
[4 Holes NE]
[2 Holes US]
2. Details of Menu Items in Adjustment Settings for Operators
74