Ricoh Pro C9200 - 0506 [Temperature; Humidity Outside]; 0507 [Screw-On Cap to Replace]; 0508 [Execute Developer Refreshing]

0506 [Temperature / Humidity Outside]
Display temperature and humidity around the machine.
Setting Items Remarks
[Temperature] Value display only.
[Humidity]
0507 [Screw-on Cap to Replace]
The Toner Bottle Cap closes. The Toner Bottle in use can be pulled out when the Cap is closed. Use it
when you want to replace the Toner Bottle.
• Make sure that the toner bottle cover (the cover of the toner dispensing section) is closed when you
perform this. After performing this, open the cover and then, pressing the release lever under the
toner bottle, remove the toner bottle.
Setting Items Remarks
[Black 1] Press [Execute].
[Black 2]
[Cyan 1]
[Cyan 2]
[Magenta 1]
[Magenta 2]
[Yellow 1]
[Yellow 2]
0508 [Execute Developer Refreshing]
Replace some part of developer inside the Development Unit.
[Machine: Maintenance]
43