Setting Item Max. Value Min. Value Step Unit
06: Setting 5 1 1 None
1331 [Motor Speed]
[Speed Adjustment]
Adjust the speed of each motor.
• If the value in "02: Paper Transfer Roller" is set differently for each paper type, the throughput is
reduced because of the need to adjust the paper transfer line speed for each paper type when
handling a job with sheets of mixed paper type.
• Even if the value in "02: Paper Transfer Roller" is set equally for all paper types, when handling a
job with sheets of mixed paper thickness, the paper transfer line speed may be switched
accordingly, resulting in reduced throughput.
• Also, when handling a job with sheets of mixed paper type with 1250 [Print Mode When
Switching Paper Type] set to [Fusing Priority Mode], if the value in "05: Fuser" is set differently for
each paper type, the process line speed is switched accordingly, resulting in reduced throughput.
Setting Item Max. Value Min. Value Step Unit
01: Transfer Timing Roller/02: Paper
Transfer Roller
3.00 -3.00 0.05 %
03: Trans-Fusing Transf Belt 1 /04: Trans-
Fusing Transf Belt 2
6.0 -6.0 0.1
05: Fusing Belt 10.0 -10.0
[Speed Adjustment]
Adjust the speed of each motor.
• If the value in "06: Process Speed Setting" is set differently for each paper type, the throughput is
reduced because of the need to adjust the process line speed for each paper type when handling
a job with sheets of mixed paper type.
[Machine: Paper Feed/ Output]
153
To Next Page
Loading...
