Ricoh Pro C9200 - 0660 [Output Trail Edge Press Setting]; 0661 [Output Fan Setting]; 0662 [Output Fan Level]; 0663 [Maximum No. Stacked Sheets in Output Tray]

0660 [Output Trail Edge Press Setting]
Set whether or not to hold the trailing edge of sheets when ejected on the Shift Tray. Setting it [ON]
reduces the diversion of sheets due to the paper type and paper condition.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item Values Default Value
[Setting] [Auto]
[On]
[Off]
[Auto]
0661 [Output Fan Setting]
Set the fan operation to the sheets on the shift tray. Air blowing peels off the sheets in close contact.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item Values Default Value
[Setting] [Auto]
[On]
[Off]
[Auto]
0662 [Output Fan Level]
Adjust the fan volume to the sheets on the shift tray. Increase the air level if the sheets are in close
contact.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item Values Default Value
[Setting] [Standard]
[Increase Air Volume]
[Standard]
0663 [Maximum No. Stacked Sheets in Output Tray]
Set the proper number of sheets for each paper size to stack on the shift tray at the time of shift sorting.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
2. Details of Menu Items in Adjustment Settings for Operators
92