Ricoh Pro C9200 - 0632 [Staple Position: Across Feed 1]; 0633 [Staple Position: Across Feed 2]

0632 [Staple Position: Across Feed 1]
Adjust the position of the staple in the vertical direction at the time of Edge Stapling. Use [+] or [-] to
expand or reduce the distance to the paper side end.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[A3 SEF] 0.0 2.0 -2.0 0.1 mm
[B4 JIS SEF]
[A4 LEF]
[A4 SEF]
[B5 JIS LEF]
[B5 JIS SEF]
[11 × 17 SEF]
[8
1
/
2
× 14 SEF]
[8
1
/
2
× 11 LEF]
[8
1
/
2
× 11 SEF]
[8K SEF]
[16K LEF]
[16K SEF]
[Other Paper Sizes]
0633 [Staple Position: Across Feed 2]
Adjust the space of the two staples in the vertical direction. Use [+] or [-] to expand or shrink the space.
[Finishing: Finisher]
71