4. Details of Menu Items in Advanced
Settings
[Machine: Image Position]
1101 [Image Position]
Items other than [Switch Paper Edge Detection Sensor] may be used when using a template to align the
image position on Sides 1 and 2.
[Image Position Result: Side 1]/[Image Position Result: Side 2]
Adjust the vertical/horizontal position of the image to be printed on side 1 or 2 of the paper.
Setting Item Max. Value Min. Value Step Unit
01: Across Feed/02: With Feed/03:
Across Feed/04: With Feed
3.00 -3.00 0.01 mm
[Image Position Result: Adjust Front & Back]
Display the registration to align the image of side 2 to the image of side 1 when performing auto adjust
image position. The value set here is added to the value of [Image Position Result: Side 2].
133
To Next Page
Loading...
