Setting Item Values Default Value
[Setting] [Default]
[Increase by a Small
Amount]
[Increase by a Medium
Amount]
[Increase by a Large
Amount]
[Default]
0666 [Staple Tray: Rib Installed Mode to Strengthen Paper]
Set the operation when the Paper Strengthening Rib is installed to Staple Tray.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item Values Default Value
[Setting] [Off]
[On]
[Off]
• Before you set [Staple Tray: Rib Installed Mode to Strengthen Paper] to [On], attach the paper
strengthening ribs.
0667 [Accuracy Priority for Stapling]
Set the accuracy priority for stapling.
This function can be used with Booklet Finisher SR5120.
Setting Item Values Default Value
[Setting] [Speed Priority]
[Accuracy Priority]
[Speed Priority]
0668 [Accuracy Priority for Booklet]
Set the accuracy priority for a booklet.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
2. Details of Menu Items in Adjustment Settings for Operators
94
To Next Page
Loading...
