Ricoh Pro C9200 - [Machine: Image Quality]; 0201 [Execute Image Quality Adjustment]; 0202 [Maximum Image Density]; 0203 [Line Width]

[Machine: Image Quality]
0201 [Execute Image Quality Adjustment]
Execute the following adjustment manually: image density /reduce density diff. in across direction /
reduce density diff. in feeding direction / reduce color dispersion.
Setting Items Remarks
[Adjust All] Press [Execute].
[Adjust Image Density]
[Density Difference: Acr Fd]
[Density Difference: With Fd]
[Color Registration]
0202 [Maximum Image Density]
Adjust max. image density for each color. Use [+] or [-] to increase or decrease adhesion amount. After
the setting change, the image density is adjusted automatically before print start.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Black] 0 5 -5 1 None
[Cyan]
[Magenta]
[Yellow]
0203 [Line Width]
Adjust laser beam for image data writing. Halftone dot and fine line becomes thicker when laser beam
increases. After setting change, image density is adjusted automatically before print start.
2. Details of Menu Items in Adjustment Settings for Operators
30