Setting Item Values
01: Correction Mode [1: Off]
[2: П Curl Correction Level: Small]
[3: П Curl Correction Level: Medium]
[4: П Curl Correction Level: Large]
[5: U Curl Correction Level: Small]
[6: U Curl Correction Level: Medium]
[7: U Curl Correction Level: Large]
1321 [Jam Detection]
[JAM080/097/098/099]
Turn on/off detect function for the following jam. J080(gap: feed)/J097(skew)/J098(gap: across)/
J099(double feed) Correction for image position gap with across & skew are also turned on/off.
Setting Item Values
01: Detect JAM099/02: Detect/Ctrl
JAM097/098/03: Detect JAM080
[0:Off]
[1:On]
[JAM097/098 Detect Threshold]
Set the threshold value which determines whether a jam has occurred for JAM097 (skew) and JAM098
(image position gap with across feed).
Setting Item Max. Value Min. Value Step Unit
04: JAM098 10.0 0.1 0.1 None
05: JAM097 7.5 mm
[Paper Edge Detection]
Set the illumination level of the image sensor for Image Position Feedback Correction: Gap with Across
Feed and Skew Correction.
4. Details of Menu Items in Advanced Settings
152
To Next Page
Loading...
