Setting Item Values
01: Curl Adjustment Setting [0:Off]
[1:On]
[Speed Adjustment]
Set whether to adjust the warp (curl) of paper in fusing.
• Specify the interval between each sheet of paper in "01: Curl Adjustment Setting". The higher the
value, the greater the interval becomes, resulting in reduced throughput.
Setting Item Max. Value Min. Value Step Unit
02: Paper Feed Interval 1/03: Paper Feed
Interval 2/04: Paper Feed Interval 3
100 10 5 %
[Machine: Paper Feed/ Output]
155
To Next Page
Loading...
