• For information about the paper tray and tray paper size settings that can be specified for a
particular function, see the manual for the relevant function.
• In "Advanced Settings" for custom paper, there are settings identical to those in Adjustment Settings
for Operators. When printing is performed from a tray to which the custom paper setting is
allocated, the setting in "Advanced Settings" for the custom paper is applied instead of the setting
in Adjustment Settings for Operators.
However, the operations related to the adjustment settings described in items below, will be as follows:
1. Image Density
[Machine: Image Quality]
0202 [Maximum Image Density]
[Machine: Image Quality] 1201 [Max Image Density]
The specified settings in Adjustment Settings for Operators are not disabled. Instead, when printing
from a tray containing custom paper, the values specified in "Advanced Settings" and Adjustment
Settings for Operators are both applied in addition to the print setting.
2. Fusing Belt Smoothing
[Machine: Maintenance] 0512 [Fusing Belt Smoothing Setting]
[Machine: Image Quality] 1249 [Fusing Belt Smoothing]
Adjustment Settings for Operators and Custom Paper Settings are applied in combination as
follows:
Values
Operation (with e Adjustment Settings for
ach sheet counted as A4)
Adjustment Settings for
Operators
Custom Paper Settings
[Off] [0:Off (Do not
Execute)]
The fusing belt is not cleaned.
[1:Normal]
[2:Frequently]
[3:More Frequently]
[4:Most Frequently]
[Automatic Execution]
*
[0:Off (Do not
Execute)]
The fusing belt is not cleaned.
[Most Frequently]
*
[Automatic
Execution:Set by User]
*
Notes on How Adjustment Settings Are Applied to Printed Copies
19
To Next Page
Loading...
