Maintenance Mode (for Four-line LCD Models)
SM 5-11 M0C3/M0C4/M0C5/M0C6/M0C7
Maintenance
Menu Description
[0 to 4294967295 / 60 / 1 sec/step]
HTTP Con Timeout
Specifies the connect timeout interval when calling the
RCG.
[1 to 90 / 30 / 1 sec/step]
HTTP Sen Timeout
Specifies the send timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Rec Timeout
Specifies the receive timeout interval when calling the
RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Retry Interval If the HTTP connection fails, specify the interval at which
the connection will be retried again.[0 to 65535 / 3 / 1
sec/step]
HTTP Retry #
If the HTTP connection fails, specify the number of times
to retry the connection.
[0 to 255 / 3 / 3 counts/step]
HTTP Con Delay
Specifies the connection request sending delay.
[0 to 255 / 5 / 1 sec/step]
Max Multipart
Specifies the maximum number of multipart.
[0 to 10 / 10 / 1/step]
Rescue G/W URL Displays the rescue URL.
Per Notice Mode
Sets the periodic notification mode.
[0 to 5 / 0 / 1/step]
Cnt Notice Mode
Sets the counter notification mode.
[0 to 5 / 0 / 1/step]
Per Notice Time Displays the periodic notification date and time.
Cnt Notice Time Displays the counter notification date and time.
Cnt End Time
Displays the counter closing date and time.
Next Per NotiTime Displays the next periodic notification date and time.
Next Cnt NotiTime Displays the next counter notification date and time.
Next Cnt End Time Displays the next counter closing date and time.
Fix CntPol Time Displays the center control polling date and time.
Test Flag
Sets the test flag.
[0 to 255 / 0 / 1/step]