Energy Save
M0C3/M0C4/M0C5/M0C6/M0C7 7-48 SM
7.13 ENERGY SAVE
7.13.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the
environment.
The backlight of the screen is turned off and "Energy Saver Mode1" appears on the screen, and
then the fusing lamp is turned off and "Energy Saver Mode2" appears on the screen.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be
different. For example, if the timers are all set to 240 min., the grey area will disappear, and no
energy is saved before 240 min. expires.
Timer Settings
The user can set these timers with User Tools (Admin. Tools > [Energy Saver Mode] > [Energy
Saver Mode1] or [Energy Saver Mode2])
• Energy Saver Mode 1 (30 sec.): This can be only turned on or off.
• Energy Saver Mode 2 (30 sec. , 1 to 240 min.): This can be turned on or off and timer setting
is adjustable (default: 30 sec.).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
