Maintenance Mode (for Four-line LCD Models)
M0C3/M0C4/M0C5/M0C6/M0C7 5-8 SM
Menu Description
5%-7% Displays the number of pages printed with coverage 5 to 7%.
8%-9% Displays the number of pages printed with coverage 8 to 9%.
10%-19% Displays the number of pages printed with coverage 10 to 19%.
20%-29% Displays the number of pages printed with coverage 20 to 29%.
Above 30% Displays the number of pages printed with coverage above 30%.
Power On Count Displays the power on counter.
Sleep Recover Count Displays the sleep recover counter.
Machine Series Number
DFU
Displays the machine series number.
Serial No
DFU
Displays the machine serial No.
Inrush Control
Sets the Inrush Control mode. When using with an external
power supply instead of a commercial power supply, set to "On".
[Off (Default)/ On]
Flicker Control
Sets the Flicker Control mode.
[Off (Default)/ On]
Scan Maintenance (Only for MF Models)
Menu Description
Mono Compression Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
Registration Adjust ADF Main Reg. Adjusts the ADF Scan main-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
ADF Sub Reg. Adjusts the ADF Scan sub-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Flatbed Main Reg. Adjusts the Flatbed Scan main-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Flatbed Sub Reg. Adjusts the Flatbed Scan sub-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Size Adjust ADF Main Reg. Adjusts the ADF Scan main-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
ADF Sub Reg. Adjusts the ADF Scan sub-scan magnification.