Smart Organizing Monitor (SOM)
SM 5-51 M0C3/M0C4/M0C5/M0C6/M0C7
Maintenance
Item Remarks
1: Sets the engine speed at half after printing
1 minute.
2: Sets the engine speed at 13ppm.
[0 to 2 / 0* / 1 /step]
PDL Menu [On * or Off]
Settings between near empty
and empty of Toner status
Printable
Sheets
Adjusts the printable sheets between "toner
near end" and "toner end".
[0 to 255 / 200 / 1 sheet/step]
Printable Dot
Count
Adjusts the printable dot count between
"toner near end" and "toner end".
[0 to 255 / 100 / 1 dot/step]
Counter Information Display the counter information.
Clear Transfer Roller EM Counter Clears the EM counter of the transfer roller.
Clear Paper Feed Roller EM Counter Clears the EM counter of the paper feed
roller.
Clear Fusing Unit EM Counter Clears the EM counter of the fusing unit.
Factory Default for Service Resets all the settings to factory default.
EM Life Display
DFU (Designed for Factory Use)
Sets the alert display when each EM parts
yield of this machine is reached.
[On or Off *]
Clear Engine Memory Resets the engine settings stored in the
EEPROM to factory default.
Reset Fusing Unit SC This menu is for resetting an SC related to a
fusing error.
Page Dot Coverage Info Displays the number of pages printed with
each coverage.
*: Default