Supported Paper Sizes
M0C3/M0C4/M0C5/M0C6/M0C7 1-14 SM Appendix
Remarks: Standard Tray, Optional Tray
C Supported and the size is molded in the tray. Need to set the paper size dial to the paper size
on the tray and select the paper size by driver.
D
Supported but the cut size is not molded in the tray. Need to set the paper size dial to "*" on
the tray and select the paper size by operation panel and driver.
N Not supported.
Remarks: By-pass Tray
D
Supported. Need to select the Bypass Tray and the paper size on operation panel and driver.
N Not supported.
Remarks: Duplex
E
Supported.
N Not supported.
To Next Page
Loading...
