Ricoh SP 3710DN - Page 120

5.System Maintenance
108
Menu
Description
does not change.
[-40.0 to 40.0 / -7.0 (Default) / 0.1 mm/step]
Vert. Tray1
Plain
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert. Tray1
Thick
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert. Tray1
Thin
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Horiz. Tray2
[-40.0 to 40.0 / -7.0 (Default) / 0.1 mm/step]
Vert. Tray2
Plain
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert. Tray2
Thick
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert. Tray2
Thin
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Horiz Bypass
tray
[-40.0 to 40.0 / -7.0 (Default) / 0.1 mm/step]
Vert Bypass
Plain
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert Bypass
Thick
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Vert Bypass
Thin
[-40.0 to 40.0 / 23.0 (Default) / 0.1 mm/step]
Horiz. Dup.
Back
[-40.0 to 40.0 / 0 (Default) / 0.1 mm/step]
Vert Dup
Plain
[-40.0 to 40.0 / 21.0 (Default) / 0.1 mm/step]
Vert Dups
Thick
[-40.0 to 40.0 / 21.0 (Default) / 0.1 mm/step]
Vert Dup Thin
[-40.0 to 40.0 / 21.0 (Default) / 0.1 mm/step]
Destination
DFU
Sets the destination and updates the engine setting.
[DOM/ NA/ EU/ ASIA/ CHN/ TAIWAN]
Test Pattern
Prints the test pattern.
Toner Disposal
Sets the machine operation at "waste toner full" of the refilled AIO.
[On or Off (Default)]
With the main motor rotation count feature, the machine can be set